Sleep Mode; Auto Power Off (Dcp Model) - Brother MFC-J245 User Manual

Chapter 1

Sleep Mode

You can choose how long the machine will
remain idle before it goes into Sleep Mode
(up to 60 minutes). The timer will restart if any
operation is carried out on the machine.
(MFC-J245)
a
Press Menu, 2, 6.
b
Press a or b to choose 1 Min, 2 Mins,
3 Mins, 5 Mins, 10 Mins, 30 Mins
or 60 Mins.
Press OK.
c
Press Stop/Exit.
(DCP-J132W)
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose 3.Sleep Mode.
Press OK.
d
Press a or b to choose 1 Min, 2 Mins,
3 Mins, 5 Mins, 10 Mins, 30 Mins
or 60 Mins, which is the length of time
the machine is idle before entering
Sleep Mode.
Press OK.
e
Press Stop/Exit.
2
Auto Power Off
1
(DCP model)
The Auto Power Off feature will turn off the
machine after it has been in Sleep Mode for
the number of hours you set. When this
feature is Off, the machine will remain in
1
Sleep Mode and not turn itself off.
The default setting is 1hour.
NOTE
(DCP-J132W only)
The machine will not power off
automatically when:
• the machine is connected to a wireless
network
1
• WLAN Enable is set to On.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
5.Auto Power Off.
Press OK.
d
Press a or b to choose 1hour, 2hours,
4hours, 8hours or Off.
Press OK.
e
Press Stop/Exit.
1