Real Time Transmission; Overseas Mode - Brother MFC-J245 User Manual

Real Time Transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for the machine to scan it into
memory. You can set Real Time TX to On
for all documents or Next Fax Only for the
next fax only.
Sending in real time for all faxes
a
Press (FAX).
b
Press Menu, 3, 2, 3.
c
Press a or b to choose On (or Off).
Press OK.
d
Press 2 so you can continue sending
your fax.
e
Load your document.
f
Enter the fax number.
g
Press Mono Start or Colour Start.
Sending in real time for the next fax
only
a
Press (FAX).
b
Press Menu, 3, 2, 3.
c
Press a or b to choose
Next Fax Only. Press OK.
d
Press a or b to choose Next Fax:Off
or Next Fax:On.
e
Press OK.
f
Press 2 so you can continue sending
your fax.
g
Load your document.
3
h
Enter the fax number.
i
Press Mono Start or Colour Start.
NOTE
• If you are sending a colour fax or if the
memory is full and you are sending a
monochrome fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
3
• If the memory is full, faxes from the
scanner glass cannot be sent until you
clear some of the memory.

Overseas Mode

If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on Overseas Mode. After you send a fax
using this feature, the feature will
automatically turn itself off.
a
Load your document.
b
Press
c
Press Menu, 3, 2, 4.
3
d
Press a or b to choose On (or Off).
Press OK.
e
Press 2 so you can continue sending
your fax.
f
Enter the fax number.
g
Press Mono Start or Colour Start.
Sending a fax (MFC model)
(FAX).
3
3
11