CRANKCASE AND CRANKSHAFT
Assembly positions starter side
Measurement A should be as in the table below
for resp. saws (Under the crankcase plane).
61, 268
4-4.5 mm
272
2 mm
281, 288
3.5 mm
Measurement B should be as in the table below
for resp. saws (Under the crankcase plane).
42, 242, 246
1 mm
394
5 mm
3120
0-0.5 mm
51, 55
1 mm above the
crankcase plane
Assembly position on the clutch side
Measurement C should be as in the table below
for resp. saws (Under the crankcase plane).
51, 55
1 mm
394
0.5 mm
254, 257, 262 1.5 mm above the
crankcase plane.
124
– English
A
B
1 mm
C
1.5 mm