Husqvarna 36 Workshop Manual page 68

Cleaning and Inspection
That measurement A is not below 1 mm.
68
– English
CENTRIFUGAL CLUTCH
Clean all parts and inspect the following:
Clutch shoes
without chamfers.
A
Check that there is no play between the
clutch shoe and clutch hub
Check for wear on the chain sprocket.
Check the condition of the needle bearing
and the bearing surface on the crankshaft.
That the clutch drum friction surface and
bearing surface are undamaged.
Clutch shoes
with chamfers.
That measurement B is not under 1 mm.
B