Epson SF-710 User Manual page 102

SF-710/510/310 User's Guide
E
Select 1 Line.
Use C/D to select, and then press A.
Screen Image is displayed. Altitude is displayed
by default.
After checking, press A and go to the following
step.
F
Select Line 1.
Use C/D to select, and then press A.
G
Select Calories Burnt.
Use C/D to select, and then press A.
Screen Image is displayed.
Settings
After checking, press A and go to the following
step.
Note:
When you want to set 2 Lines or 3 Lines, repeat
steps 6 and 7.
H
Complete the settings.
Hold down A.
The measurement screen is displayed.
Press A on the measurement screen to change the
screen, and then check if Screen4 has been
changed.
Note:
Hold down A on the measurement screen to display the
time screen.
Setting Pace&Graph/HR&Graph
Here we will explain how to display Pace&Graph in
Screen4.
Operation buttons
A
Display the measurement screen.
Use one of the following methods to display.
❏ When performing GPS positioning:
Press C on the time screen.
❏ When skipping GPS positioning:
102