Epson SF-710 User Manual page 39

SF-710/510/310 User's Guide
D
Stop measuring.
Press C while measuring.
Press C to start measuring again.
E
Reset the measurement results.
Hold down D while measuring is stopped.
When you reset the display, it returns to the
status before measuring started allowing you to
start the next measurement.
Data measured up to that point is stored in the
device's memory, and you can check it by
pressing D on the time screen.
"Checking Measurement Data" on
U
page 62
Note:
To stop measuring and return to the time screen
❏ After resetting the measurement results in step 5,
hold down A.
❏ While the screen in step 4 is displayed while
measurement is stopped, hold down C. The
measurement results are reset and the time screen is
displayed.
❏ If no operations are made for 60 minutes on a screen
other than the measuring screen, the time screen is
displayed.
Measure
39