Creating An Account (When Using For The First Time) - Epson SF-710 User Manual
Gps sports monitor
Hide thumbs
Also See for SF-710:
- User manual (149 pages) ,
- Ios user's manual (40 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
SF-710/510/310
User's Guide
Creating an Account (When Using for the First Time)
You need to create an account with the Web application (NeoRun) when using it for the first time.
A
Connect the cradle to the computer on which NR Uploader is installed with a USB
cable.
B
Place the device into the cradle.
Check that the contact points on the device are pointing up and match the contact marks on the cradle.
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the cradle could be damaged.
NR Uploader starts.
Note:
If NR Uploader does not start, disconnect the cable from the cradle, wait a few seconds, and then reconnect. Do not
remove the device from the cradle.
Data Management Using the Web Application (NeoRun)
78
Advertisement
Table of Contents
