Technical Specifications - HP 3PAR StoreServ 10000 Specifications

QuickSpecs

Technical Specifications

Physical Specifications
2-Meter Cabinet
Dimensions (width x height x depth)
Service Clearance (front and back)
Weight (not populated)
Maximum Weight (fully populated)
Maximum Weight per Leveling Foot
Maximum Load per Leveling Foot
Component Weights
10400 Base Configuration
10800 Base Configuration
2 Controller Nodes (fully populated)
Drive Chassis (fully populated)
Service Processor
Supported Host FC Connections
FC Connector Type from Storage System to Host Port
FC Cable Core Diameter
Connector Boot Length
Power and Heat
Single Phase Power Supply Requirements
Input Voltage (VAC)
Frequency (Hz)
Circuit Breaker Maximum
Power Connectors for 2-Meter Cabinet
Power Receptacles
Three Phase Power Supply Requirements
NEMA (North America, Taiwan, Philippines & Japan)
Input Voltage (VAC)
Frequency (Hz)
Circuit Breaker Maximum
Power Connectors for 2-Meter Cabinet
Power Receptacles
IEC (International)
Input Voltage (VAC)
1
1
DA - 14103 Worldwide — Version 19 — January 17, 2014
HP 3PAR StoreServ 10000 Storage
23.6 x 76.5 x 36 in
Front/Rear: 36 in / 30 in
472.1 lb
1,919.8 lb
480 lb
200 lb/sq in
693.9 lb
786.9 lb
133 lb
180 lb
20.8 lb
LC to LC
OM3 / OM4
standard
30 A per PDU
(4) L6-30P with 1+1 redundant or (4) IEC 60309-32A (332P6S) with 1+1
(4) L6-30R with 1+1 redundant or (4) IEC 60309 with 1+1 redundant
48 A per PDU (de-rated to 27.71 A per phase)
(2) IEC 309, 3-pole, 4-wire, BLUE, gnd clocked to 3:00 with 1+1 redundant
(2) Hubbell HBL460C9W or equivalent
200 - 240 p-n; 380 - 415p-p
60 x 194.3 x 91.3 cm
Front/Rear: 91.4 cm / 76.2 cm
214.1 kg
870.8 kg
217.7 kg
14 kg/sq cm
314.7 kg
356.9 kg
60.4 kg
81.6 kg
9.4 kg
220 (200 - 240)
50 - 60
6
(de-rated to 24 A)
redundant
200 - 240 p-p
50 - 60
Page 19