HP 3PAR StoreServ 10000 Specifications page 27

QuickSpecs
SAN / Array Compatibility - HP 3PAR StoreServ File Controller
HP 3PAR StoreServ File Controller
Expansion Slots
Primary Riser
(Standard)
PCIe Riser
(Optional 3-slot)
Storage Controller
Expansion Technology
Slots #
1 PCIe 3.0
2 PCIe 3.0
3 PCIe 2.0
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment
number
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support up to 150w PCIe cards, but an additional Power Cord Option is required (PN
669777-B21). See Option Section below for offering.
Expansion Technology
Slots #
4 PCIe 3.0
5 PCIe 3.0
6 PCIe 3.0
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment
number
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support up to 150w PCIe cards, but an additional Power Cord Option is required (669777-
B21). See Option Section below for offering
NOTE: HP 3PAR StoreServ File Controller includes a storage controller designed for internal drives housing
the O/S mirror only; an HBA is required to address connectivity to the 3PAR StoreServ Storage array.
Controller(s)
RAID
DA - 14103 Worldwide — Version 19 — January 17, 2014
Bus Connector
Width** Width
X16 X16
X8 X8
X4 X8
Bus Connector
Width** Width
X16 X16
X8 X8
X4 X8
HP Smart Array P420i/1GB with FBWC
Needed for internal drive mirror only
HP 3PAR StoreServ 10000 Storage
Bus Number* Form Factor
7 Full Length,
Full Height
Slot
10 Half Length,
Full Height
Slot
13 Half Length,
Full Height
Slot
Bus Number* Form Factor
16 Full Length,
Full Height
Slot
20 Half Length,
Full Height
Slot
23 Half Length,
Full Height
Slot
Notes
Proc 1
Proc 1
Chipset
Notes
Proc 2
Proc 2
Proc 2
Page 27