HP 3PAR StoreServ 10000 Specifications page 3

QuickSpecs
Overview
NOTE: The 1600TB and 3200 TB maximum raw capacity limits for the HP 3PAR StoreServ 10400 and 10800 Storage respectively are
applicable only to systems running HP 3PAR OS version 3.1.3 or later
1 Each port is full bandwidth 8 Gbit/s Fibre Channel capable
2 Recommended minimum is 32 drives which results in a 9.6 TB minimum raw capacity.
3 Maximum raw capacity currently supported with any and all drive types
4 For storage capacity, 1 GB = 1,024,000,000 bytes and 1 TB = 1,000 GB
5 RAID MP is HP 3PAR Fast RAID 6 Technology
6 SSDs are Solid State Drives
7 SAS drives are Serial Access SCSI Drives
8 NL drives are Nearline (7.2k) disks
9 Recommended minimum is 4 drive chassis per pair of controller nodes
10 Each port is full bandwidth 10 Gbit/s iSCSI capable
11 Two built-in 1-GbE RCIP ports per node pair; maximum of 8 usable; RCFC works out of the FC Host ports
12 Applies to the array storage assigned to 3PAR StoreServ File Controller for file services
13 For details, please refer to the 3PAR StoreServ File Controller section in this document
14 Each port is full bandwidth 10 Gbit/s FCoE capable
NOTE: Specifications are subject to change without notice
Host OS Support
Citrix® XenServer® | HP-UX® | IBM® AIX®
Microsoft® Windows® Server, including Microsoft® Hyper-V™
OpenVMS* | Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris
Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization
SUSE® Linux® Enterprise | VMware vSphere™
* Registered Release
For latest information on supported operating systems refer to Single Point of Connectivity Knowledge for HP Storage Products
(SPOCK): http://www.hp.com/storage/spock
DA - 14103 Worldwide — Version 19 — January 17, 2014
HP 3PAR StoreServ 10000 Storage
Page 3