Dell 6 series User Manual page 92

NOTE:
the configuration are imported as dedicated hot spares on two conditions —
the associated virtual disk is already present or the associated virtual disk is
also imported along with the configuration.
NOTE:
ensure data integrity for the virtual disks. For more information about
checking data consistency, see "Checking Data Consistency" on page 88.
2 If all the physical disks in a virtual disk are removed at different times and
re-inserted, the controller considers the disks to have foreign
configurations. Perform the following steps:
Select Foreign Configuration View to display the complete virtual
a
disk, across different foreign configurations and allow foreign
configurations to be imported.
Press <F2> to display the options Import and Clear.
b
NOTE:
import operation.
Select Import to merge the foreign configurations with the existing
c
configuration on the controller or Clear to delete the foreign
configuration(s) from the re-inserted disk(s).
If you select Import, all drives that were pulled before the virtual disk
became offline are imported, and then automatically rebuilt.
NOTE:
ensure data integrity for the virtual disks. For more information about
checking data consistency, see "Checking Data Consistency" on page 88.
3 If the physical disks in a non-redundant virtual disk are removed, the
controller considers the drives to have foreign configurations. Perform the
following steps:
Select Foreign Configuration View to display the complete foreign
a
configuration information.
Press <F2> to display the options Import and Clear.
b
Select Import to import the foreign configuration to the virtual disk or
c
Clear to delete the foreign configuration(s) from the re-inserted
disk(s).
No rebuilds occur after the import operation because there is no
redundant data to rebuild the drives with.
92
Configuring and Managing RAID
When you import a foreign configuration, the dedicated hot spares in
Start a consistency check immediately after the rebuild is complete to
You must have all the drives in the system before you perform the
Start a consistency check immediately after the rebuild is complete to