NEC 900i Installation And User Manual page 34

Caller ID
When you see ...
PRIVATE
OUT OF AREA
UNAVAILABLE
To answer a Caller ID call (with the pre-answer display dis-
abled):
1. Press TALK and then press the flashing line key.
To answer a Caller ID call (with the pre-answer display
enabled):
1. Press the flashing line key to display the incoming caller's
phone number.
2. Press the flashing line key again to display the incoming
caller's name.
3. Press TALK to answer the call.
To re-display the Caller ID information for the call you are on:
1. Press the line key for the call.
2-16
Your caller has blocked Caller ID.
Your caller has dialed from an area that
does not support Caller ID.
Your telephone company's Caller ID
service is out of order.
You see the incoming caller's name and number and you
answer the call.
You can press another flashing line key instead of going to
the next step.
-If the telephone company does not offer the name option,
you skip to the next step.
-You can press another flashing line key instead of going to
the next step.
If you previewed several ringing lines, you'll answer the
call on the most recently pressed line key.
Onyx VSi System
It means ...