For Fax/Did - Siemens HiPath 1100 User Manual

Step by step
SAVE?
CF-NR TO:.....
CALL FOR: ANNOUNC. FAX
CALL FOR: ANNOUNC. DID
CALL FOR: FAX/DDIA CALL
CALL FOR: ANNOUNCEMENT
SAVE?
j
Enter the number for the:
1. Extension you want to call (e.g., 11/101).
2. UCD Subscriber group for voice mail (e.g., 790).
3. Call group (e.g: 770)
4. Access to an external line (e.g., 0) and the external
destination number.
Confirm.
If call forwarding is activated, "CF-NR TO ..." will appear
for a certain time in the display after you have switched
off.

For Fax/DID

When a Fax/DID module is installed, calls can be for-
warded to auto-answering mode.
j
Enter the desired type of call forwarding:
*11
1.
*14
2.
j
Enter the call forwarding destination number.
740
1.
Call forward to FAX is indicated on the display.
741
2.
sion)
Call forward to DID is indicated on the display.
742
3.
Call forward to DID/FAX is indicated on the display.
743
4.
Call forward to greeting is indicated on the display.
Confirm.
[1] For further information about the Fax/DID module, see Fax/DID
Auto-answering mode in the Programming manual.
Functions used when receiving calls
1
- direct call forwarding
- call forward no answer
- FAX
- attendant (direct dialing to exten-
- Fax/DID
- Message
67