Configure Network Scanning For Macintosh - Brother ADS-1000W User Manual

Prepare Your Network
4
Click the Scan To Button tab and enter your computer name in the Display Name field. The
Destination drop-down list in Scan to Network Device from the Scan tab in Web Base Management
(ADS-1000W only) (see Save Scanned Documents on Your Computer on page 130) or on the LCD of
the machine (ADS-1500W only) displays the name you enter. The default setting is your computer name.
You can enter any name that you like.
5
If you want to avoid receiving unwanted documents, enter a 4-digit PIN number in the Pin number and
Retype Pin number field.
(ADS-1500W only)
To send data to a computer protected by a PIN number, the LCD prompts you to enter the PIN number
before the document can be scanned and sent to the computer.

Configure Network Scanning for Macintosh

If you want to scan from the machine on a network, you must choose the networked machine in the
Device Selector application from the Model drop-down list in the main screen of ControlCenter2. If you have
already installed the MFL-Pro Suite software following the network installation steps in the Quick Setup
Guide, this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the Control Panel.
4
4
45