Brother ADS-1000W User Manual page 104

Scan Using Your Computer
Setting Description
Plastic Card Lets you scan cards, such as driver's licenses or
Mode insurance cards, using these automatic settings:
 Resolution: 600 dpi
 Document Size: 2 in 1 (Auto)
 2-sided Scanning: On (Short-edge binding)
 Auto Deskew: On
 Auto Image Rotation: Off
NOTE
• If you want to scan a plastic card with different settings,
set Plastic Card Mode to off and Resolution to 600 dpi.
• Load only one plastic card at a time.
You can configure more settings in the Advanced Settings dialog box. Click the Advanced Settings button.
Setting Description
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in gray
areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Auto Deskew Corrects the skew (within 5 degrees) of the scanned
data.
Auto Image Changes the direction of the document based on the text
Rotation
orientation.
1
Depending upon the condition of the original document, this function may not work properly.
1
1
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File
Yes
5
File
Yes
Yes
Yes
Yes
90