Pioneer ANH-P9R Operation Manual page 36

MAN-ANH-P9R-GB.fm Page 36 Tuesday, June 4, 2002 1:39 PM
Pause lets you temporarily stop playback of the CD.
The light illuminates. Play of the current track pauses.
Press again to turn the pause off.
When the pause mode is exited while pause is on, "PAUSE" is displayed in the basic
display.
You can also turn pause on or off by
pressing in the following
display.
Disc title input lets you input up to 48 CD titles up to 10 letters long into the built-in CD
player. If you input a CD title, the entered title is displayed.
For details of operation, refer to "Entering disc titles" on page 39 under "Multi-CD
Player".
When playing a CD TEXT disc, if you switch to this mode, "No title input" is displayed and
you cannot input the title.
After the titles for 48 discs have been entered, the data for a new disc will overwrite the
oldest one.
If you connect a multi-CD player, you can input disc titles for up to 100 discs.
=
>
?
@
A
B
Only those functions described in this manual are supported for 50-disc multi-CD
players.
This product can control a multi-CD player, which is sold separately.
Press until "Multi-CD" appears.
Rolling the VOLUME changes the volume level.
 
A disc number for which there is no disc will be skipped.
You can use the buttons – (or – ) to select a disc directly.
 

Pressing skips to the start of the next track.

Pressing once skips to the start of the current track. Pressing again will skip to the
previous track.
 
If you press and hold or , you can perform fast forward or reverse.
When the multi-CD player is performing the preparatory operations, "Ready" is displayed.
If the multi-CD player cannot operate properly, an error message such as "ERROR-14" is
displayed. Refer to the multi-CD player owner's manual.
If there are no discs in the multi-CD player magazine, "No disc" is displayed.
After choosing your destination, press and you can listen to the guide voice during
navigation guidance.