Switching The Auxiliary Setting - Pioneer ANH-P9R Operation Manual

MAN-ANH-P9R-GB.fm Page 52 Tuesday, June 4, 2002 1:39 PM
Display brightness adjustment lets you adjust the display for easier viewing when
lighting conditions change.
Press until "C.MENU" appears.
 
 
Each press of or increases or decreases the brightness.
"00" – "31" is displayed as the brightness is increased or decreased.
To prevent the display from being too bright at night, the display is automatically
dimmed when the car's headlights are turned on. You can switch the dimmer on or off.
Press until "C.MENU" appears.
"ON" appears on the display.
Press again to turn the dimmer off.
There are three patterns to choose from.
Press until "C.MENU" appears.
An IP-BUS-RCA interconnector such as the CD-RB20 or CD-RB10 (sold separately)
lets you connect this product to auxiliary equipment featuring RCA output. For more
details, refer to the IP-BUS-RCA interconnector's owner's manual.
Press until "AUX" appears.
If the auxiliary setting is not switched on, AUX cannot be selected. For more details,
see "Switching the auxiliary setting" on page 49.
The title displayed for the AUX source can be changed.
Press until "AUX" appears.
Refer to "Entering disc titles" on page 39, and perform procedures 3 to 7 in the same
way.
Even if you do not press TTLin you can enter the title, but you will not be able to change the
character types.