Audio Menu - Pioneer ANH-P9R Operation Manual

MAN-ANH-P9R-GB.fm Page 46 Tuesday, June 4, 2002 1:39 PM
There are seven stored equalizer curves which you can easily recall at any time. Here
is a list of the equalizer curves:
FLAT Flat
S.BASS Super bass
PWRFL Powerful
NATRL Natural
VOCAL Vocal
CSTM1 Custom1
CSTM2 Custom2
"CSTM1" and "CSTM2" are adjusted equalizer curves.
A separate "CSTM1" curve can be created for each source. (The Built-in CD player
and Multi-CD player are set to the same Equalizer Curve Adjustment setting
automatically when using the AVH-P6400CD.)
If you make adjustments when a curve other than "CSTM2" is selected, the equalizer
curve settings are memorized in "CSTM1".
A "CSTM2" curve can be created common to all sources.
If you make adjustments when the "CSTM2" curve is selected, the "CSTM2" curve
is updated.
When "FLAT" is selected no supplement or correction is made to the sound. This is
useful to check the effect of the equalizer curves by switching alternatively between
"FLAT" and a set equalizer curve.
 
You can also use and to select the desired equalizer curve.
If you do not operate the function within about eight seconds, the display is automatically
returned.
"SW2" is displayed only when the subwoofer output is on in the subwoofer output mode
(SW1).
"SLA" is not displayed when you select FM tuner as the source.
The audio menu has the following
functions:
If you do not operate the function within about 30 seconds, the display is automatically
returned.
You can select a fader/balance setting that provides an ideal listening environment in
all occupied seats.
 
 
Each press of or moves the front/rear speaker balance towards the front or the
rear.
"FADER F15" – "FADER R15" is displayed as the front/rear speaker balance moves
from front to rear.
"FADER FR00" is the proper setting when only two speakers are used.
When the PREOUT setting is "SW", you cannot adjust front/rear speaker balance.
Refer to "Switching the rear output setting" on page 50.
 
 
Each press of or moves the left/right speaker balance towards the left or the right.
"BALANCE L09" – "BALANCE R09" is displayed as the left/right speaker balance
moves from left to right.
You can adjust the level, the frequency and the Q factor.
Level (dB)
Q=2N
Center frequency Frequency (Hz)
Q=2W