NEC Express5800 Series User Manual page 13

NOTE:
When the setting of the firewall is effective, port (161/UDP) that SNMP
uses is blocked.
In this case, because NEC ESMPRO Agent cannot be communicated
with NEC ESMPRO manager, the server cannot be monitored from
NEC ESMPRO manager.
Please open the port according to the following procedures.
1. Click Start, point to Settings, click Control Panel, and then double-
click Windows Firewall.
2. In the Windows Firewall dialog box, click Add Port on Exceptions
tab.
In the Add a Port dialog box, set the values as follows, and then
click OK.
Name
Port number
Select
3. Close the Windows Firewall dialog box.
On Windows systems, the NEC ESMPRO Agent needs the necras.sys driver and NECHWID.exe.
To install the necras.sys and NECHWID.exe, run the System update of the "NEC difference
module".
Setup of Firewall
: snmp
: 161
: UDP
Installation of the NEC ESMPRO Agent 9