12 Using the NEC ESMPRO Agent
From the General tab you can set the following information:
SNMP Setting
– "Enable the NEC ESMPRO Manager to modify SNMP Setting" indicates whether the
NEC ESMPRO Manager can modify server operation parameters via SNMP. A check
enables NEC ESMPRO Manager modifications; no check disables NEC ESMPRO
Manager modifications.
– Permit Remote Shutdown/Reboot specifies whether the NEC ESMPRO Manager can
perform a remote Shutdown or Reboot. A check gives the NEC ESMPRO Manager
permission; no check denies the NEC ESMPRO Manager permission.
NOTE:
Manager is not checked.
– SNMP Community is the SNMP community name to which you belong.
Enable DMI function ⎯ indicates whether the NEC ESMPRO Manager can modify or
view server operation parameters via DMI. A check enables DMI function; no check
disables DMI function.
Report Setting ⎯ Displays the Alert Manager. To change Alert Manager settings, see NEC
ESMPRO AlertManager User's Guide.
Storage Setting ⎯ Displays the "NEC ESMPRO Storage Monitoring" used to change
setting of storage monitoring.
Rack mount
– Name: specifies the name of the rack mount system. If the system is a rack-mount
model, this box is automatically enabled. To enter unique name for the system has the
system viewed as a rack mount system on the NEC ESMPRO Manager.
Chassis Identify
– To start the "chassis identify" function (lamp, beep....), click the [Identify Now] button.
When you click the [Stop Identify] button, the "chassis identify" function is stopped.
When you close the NEC ESMPRO Agent applet, the "chassis identify" function is
automatically stopped.
This field is inactive when Enable the NEC ESMPRO