Kenmore 79036932905 Installation Instructions Manual page 2

NOTES:
_! Do not pinch the power supply cord between the range and the wall.
Do not seal the range to the side cabinets.
24" (6! cm) minimum clearance between the cooktop and the bottom of the cabinet when
the bottom of wood or metal cabinet is protected by not less than 1/4" (0.64 cm) flame
Ot retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum, or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance when the cabinet is unprotected.
For cutouts below 22 7/8"(58.1 cm), appliance will slightly show out of the cabinet.
Allow at least 19 ¼" (48.9 cm) clearance for door depth when it is open.
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
(see Note 4)
______ 1 1/8"
i (2.86 cm)
FRONT
OF _F -_
CABINET Ref.
S
Door Open
(see note 5)
A
Side Panel
35 7/8" (91.1cm) - 31 5/16"
36 5/8" (93cm) (79.5cm)
28 5/16" (71.9cm) 30_+1/16" (76.2_+0.15cm) 21 3/4" (55.2cm) Min.
22 1/8" (56.2cm) Max
24" (61cm) Min. with
backguard
36 5/8" (93cm) Max.
35 7/8" (91.1cm)