ABB Welcome User Manual page 47

ABB-WelcomeTouch
Article number: 83220 AP-xxx-500
Functions
» 17.8 cm (7") large high-quality colour TFT touchdisplay with
intuitive control (resolution of 800 x 480 [WVGA])
» Automatic activation of the camera image at an incoming
door call
» During absence three pictures of the visitor are
automatically stored in the events memory
» Manual recording of pictures during a conversation is
possible at any time
» Events memory: the user is informed who rang the bell at
his front door and when
» Electronic picture frame can be selected in standby mode
» Hands-free function with suppression of noise and echo
interference for audible communication
» Six easy operation keys for the basic functions of
communication, opening of doors, mute function, switching
of lights, snapshot and settings are easy and fast to operate
» Differentiating between door call and floor ringing
» Five ring tones can be selected
» Monitoring barrier
» Five-stage adjustable volume
» Automatic door opening function, opens the front door
when the doorbell button is pressed
» Power supply and data transmission via 2-wire bus;
additional wiring with indoor station for auxiliary power
is not required
Technical data
Operating temperature: -5°C–+40°C
Protection: IP 30
Single-wire clamps: 2 x 0.6 mm
Fine-wire clamps: 2 x 0.6 mm
Bus voltage: 28 V – ±2 V
QR-Code service
www.busch-jaeger-catalogue.com/
8300-0-0083,artikel.html
–2 x 1 mm
2 2
–2 x 0.75 mm
2 2
ABB-Welcome
Audio indoor station with handset
Article number: 83205 AP-xxx-500
Functions
» The handset is easy to take up and replace
» Three easy operation keys for the basic functions:
opening the door, switching the lights and mute function
» Activating the easy operation keys without lifting the handset
» Differentiating between door call and floor ringing
» Five ring tones can be selected
» Monitoring barrier
» Easy to mount on the surface or install on the commercially
available 58 flush-mounted socket
Technical data
Operating temperature: -5°C–+40°C
Protection: IP 30
Single-wire clamps: 2 x 0.6 mm
Fine-wire clamps: 2 x 0.6 mm
Bus voltage: 28 V – ±2 V
QR-Code service
www.busch-jaeger-catalogue.com/
8300-0-0080,artikel.html
User Manual ABB-Welcome | Overview of Range 47
–2 x 1 mm
2 2
–2 x 0.75 mm
2 2