Sharp RK-12S30 Installation Instructions Manual page 2

PREPARATION
Follow the directions from 1 to 5 to attach cushions to some parts.
1. EXHAUST DUCT UPPER
Remove the backing paper from each CUSHION _.
Attach the CUSHIONS _ to each side flange of the EXHAUST DUCT UPPER as shown in the illustration
below.
CUSHION _1_
EXHAUST DUCT UPPER
2. EXHAUST DUCT BACK
Remove the backing paper from CUSHION @.
Attach the CUSHION @ atthe lower flange of the EXHAUST DUCT BACK as shown in the illustration below.
EXHAUST DUCT BACK
2