Sharp RK-12S30 Installation Instructions Manual page 6

STEP 5: iNSTALLATiON OF REAR SPACER and EXHAUST DUCT UPPER
_0Attach RECTIFIER PLATE L to inside of EXHAUST DUCT UPPER with 4 SCREWS (A) as shown in Figure
5-A.
@Place EXHAUST DUCT UPPER over the oven and EXHAUST DUCT BACK, and attach REAR SPACER
with 2 SCREWS (A) in Figure 5-B.
@Tighten together EXHAUST DUCT UPPER and EXHAUST DUCT BACK at the left and right sides with 2
SCREWS (A) as shown in Figure 5-B.
REAR SPACER EXHAUST DUCT UPPER
SCREW (A)
RECTIFIER PLATE L
SCREW (A)
SCREW (A)
EXHAUST DUCT UPPER
SCREW (A)
Figure 5-A
EXHAUST DUCT BACK
Figure 5-B
STEP 6: INSTALLATION OF EXHAUST DUCT LEFT
_0 Attach EXHAUST DUCT LEFT to the left wall of the oven.
-I-ighen with 6 screws (A) as shown in Figure 6.
EXHAUST DUCT
SCREW (A)
-- EXHAUST DUCT
LEFT
SCREW (A)
Figure 6
DIVIDE PLATE L
6