Print Reduction; Selecting The Print Reduction Mode - Panasonic Panafax DX-1000 User Manual

04010000001

Print Reduction

04004010008
This machine can use Letter, Legal or A4 size plain paper for recording. Sometimes, oversized documents
sent to you by the other parties cannot be printed within a single page. When this occurs, the document will
be divided into separate pages.
This machine is equipped with a Print Reduction function to solve this problem. You may select the most
appropriate setting from the selections described below.
1. Automatic Reduction
04004040008
Each page of a received document is first stored in memory. Based on the document length, your machine
will automatically calculate the suitable reduction ratio (70% to 100%) to print the entire document on a single
page. If the received document is extremely long (over 39% longer than the recording paper), the document
will be divided into separate pages and printed with no reduction.
2. Fixed Reduction
04004990002
You can predetermine the reduction ratio from 70% to 100% in 1% steps. The document(s) you received will
be reduced to this ratio regardless of the size.
04004990003

Selecting the Print Reduction Mode

Set Fax Parameters as shown below. (see page 61)
04004020010
1. To set Automatic Reduction mode.
(1) No. 24 Print Reduction set to "Auto".
2. To set Fixed Reduction mode.
(1) No. 24 Print Reduction set to "Fixed".
(2) No. 25 Reduction Ratio set to any number between 70% through 100%. (see Note)
Ex: A4 to A4 – 96%
04004990004
Note:
04004070008
Receiving Documents via Telephone Line
A4 to Letter – 90%
Letter to Letter – 96%
Legal to Letter – 75%
If the sending side is set to print the header on the outside of the copy area, a greater reduction ratio will
be required.
4
101