Table of Contents
Advertisement
06004000001
Sending Documents via Internet Relay
06004010003
Once you have recorded all the necessary parameters in your machine, you can send a document to one
or multiple G3 fax machines automatically through the Internet Relay Station by using the procedure
described below. The Internet Relay Station must have all the necessary parameters setup.
J To a Location That Has a Pre-programmed Relay Station
06004050015
1
06004020009
06004060052
2
06004060053
3
06004060054
Note:
06004070008
Set document(s) face down.
Enter only the telephone number(s) of the End Receiving
Station(s) using any combination of the following methods.
One-Touch Dialling.
Abbreviated Dialling.
Manual Number Dialling (up to 50 stations), press
SET
after each station is entered. (See Note)
Directory Search Dialling, press
station is entered. (For details, see pages 80 to 83)
Ex:
02
START
The document(s) is stored into memory and your machine
starts to send the document(s) to the Relay email address
of the Relay Station with the telephone number for the End
Receiving Station.
Ex: End Receiving Station:4681111234
Relay Station
After the Relay Station completes its transmission to the
End Receiving Station(s), your machine receives a COMM.
Journal from the Relay Station. This Journal confirms
whether the Internet Relayed Transmission was
successful.
If the Relay Station requires a special access number to get an outside line, enter that access number first
PAUSE
then press
to enter a pause (represented by a "–") before entering the full number.
Relayed Transmission
SET
after each
(Telephone number)
[See Note]
:uk-rly@london.panasonic.co.uk
ENTER STATION(S)
THEN PRESS START 00%
<02> STOCKHOLM
4681111234
* STORE *
NO.002
PAGES=01
05%
* STORE * COMPLETED
TOTAL PAGES=05
25%
ON LINE *MEM.XMT*
uk–rly#4681111234@if
6
141
Advertisement
Table of Contents
