Wrong Transmission Prevention Function; Direct Dial Restriction Function; Multiple Address Prohibit Function - Panasonic UF-6300 Operating Instructions Manual

Sending Documents

Wrong Transmission Prevention Function

The following functions have been provided to prevent transmission to a wrong address.
These include the dial re-enter function to prohibit direct dialling or multiple addresses, and a function to
confirm the address.

Direct Dial Restriction Function

This function prohibits all designations of addresses by direct dialling (Including manual transmission). This
function operates if Fax Parameter "136 RESTRICT D. DIAL" of the system registration is "VALID". (See
page 40)
• If this function is set, even when telephoning from an external device, it is not possible to use direct
dialling.
• However, if direct dialling standby is displayed, press
If keypad or
display.

Multiple Address Prohibit Function

With this device, it is possible to combine direct dialling and AUTO dialling, etc. to send the same document
by fax to multiple addresses. If you do not wish to send to multiple addresses, set setting "117 MULTI
STATION" of the system registration to "INVALID" and the system will be set to transmit to only one address.
This is useful to prevent an operation of mistakenly transmitting to multiple addresses.
If you specify multiple addresses, the following message will appear on your display.
NOTE
54
Redial/Pause
are pressed, the following message will appear on your
1. If multiple address designation is set to "INVALID", it is not possible to transmit to multiple
addresses.
2. If multiple address designation is set to "INVALID", it is not possible to use group dial.
3. If multiple address designation is set to "INVALID", it is possible to use the program dial in
which multiple addresses are set.
to start redial.
Redial/Pause
DIRECT DIAL IS
NOT AVAILABLE
NOT AVAILABLE.
ONLY 1 STN PERMITTED