Redialling - Panasonic UF-6300 Operating Instructions Manual

Redialling

Automatic Redialling
If a busy line is detected, the machine will redial the number up to 3 times at 3 minutes
interval. During that time, a message will appear as shown at right.
A file number is shown in the upper right hand corner of the display if it is a memory
transmission file.
Manual Redialling
You can also redial the last dialled number manually by pressing
To redial the last dialled number through memory
1
2
3
The document is stored into memory with a file number.
Then the machine dials the last dialled number.
To redial the last dialled number through ADF
1
2
3
1
4
Your machine starts to dial the last dialled number.
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press
immediately.
Set document(s) face down.
Set document(s) face down.
8 9
Sending Documents
WAIT TO DIAL
<01>(Station name)
Redial/Pause key.
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE *
PAGES=001
* DIALLING *
5551234
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
PRESS START TO DIAL
5551234
* DIALLING *
5551234
Redial/Pause
NO.001
NO.002
01%
NO.002
00%
to start redialling
65