Toshiba 2000 series User Manual page 129

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Table 17 Feature Button Definitions (continued)
2000-series
Telephone
Appendix
Release and Answer Button
Press to disconnect or complete the transfer the current CO or [DN] call and
automatically answer the new incoming CO or [DN] call.
Release Button
Press to disconnect or complete the transfer of the current CO or [DN] call and to place
your station in the idle condition.
Save Button
After dialing an outside or internal directory number, press to "save" the number. Later,
you can have the system automatically redial the number for you when you press the
button after accessing an internal or outside line.
Speed Dial Button
Press to Speed Dial a telephone number or feature access codes. SD buttons can be
used as either System Speed Dial numbers or Station Speed Dial numbers.
Speed Dial Select Button
Press (in conjuncton with Redial) to store and access Speed Dial number.
Pause (Long) Button
Press to insert a 10-second pause when programming Speed Dial numbers.
Pause Button
Press to set either a one-half or two-second pause when programming Speed Dial
numbers. (The pause time is set in system programming).
Start Button
Press to make an outgoing call using an ISDN trunk.
Subaddress Button
Press to enter a subaddress on an ISDN trunk outgoing call.
Background Music Button
Press to turn Background Music on or off over your station speaker.
Tone Button
Press to change the outgoing dialing of the CO line in use from dial pulse to tone
signaling.
Definitions
Button Labels
117