Buttons; Fixed Buttons; Fixed Button Definitions - Toshiba 2000 series User Manual

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Buttons

There are two sets of buttons, fixed and flexible. The fixed buttons (e.g.,



,
(see Figure 1). The flexible buttons consist of Directory Number (Primary, Secondary,
Phantom) and feature buttons. The number of preprogrammed flexible buttons varies by
telephone.

Fixed Buttons

The fixed buttons are located on your dial pad and enable you to perform standard functions quickly
and easily.
Table 1

Fixed Button Definitions

Button
 
(Conference/
Transfer)


The Grand Tour
 
, , and ) are standard to every Strata DK 2000-series telephone
Press to set up conference and transfer calls (see
Page 37).
Press once to hold internal or outside calls. The
Line LED flashes green at the internal hold rate.
...or press twice to enable Exclusive Hold. The
Line LED flashes green at the exclusive hold rate.
Note
Exclusive Hold enables you to place a call on hold so that only you or
somebody using a Call Pickup code at another station can retrieve it.
To retrieve a call on hold:

Press or [DN] which is on hold
...or if the call is on Exclusive Hold, from another station dial

[DN], or dial
on.
If a call is not retrieved by a certain time (set in
system programming), it recalls back to your phone.
You hear repeated recall tone (or if you are on the
phone, you hear recall tone twice).
Definitions
plus the CO line number (001~200) that the call is held
Buttons
  
, , ,
"Conference Calls" on
HOLD LINE 10
JAN 01 SUN 12:19

plus your
HOLD LINE 201
LINE 10 RECALL
3