Conference Calls - Toshiba 2000 series User Manual

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
...or if your telephone
has the Auto Hold
feature, just press the
flashing [DN] or
 
.
To answer a waiting call by disconnecting or transferring the current call
Hang up or transfer
the existing call; the
camped-on call rings
your station
...or press the flashing
[DN] or

Conference Calls

This feature enables you to add other parties to an existing call. (If you have an LCD
telephone, you can use Soft Keys to make a conference call.) The following conferencing
configurations are possible:
up to two stations and two CO lines
up to three stations and one CO line
up to four stations
To make a conference call
1. While on a call, press

2. Dial a [DN] or access
a CO line and dial the
telephone number.
3. When the called party
answers, press

Features
You are connected to the transferred call. The [DN] or Line
LED flashes green (in-use).
Note See your System Administrator to find out if you have
Auto Hold.
The existing call disconnects or transfers. The camped-on line
rings your telephone and the Line LED flashes green
(incoming call).
This disconnects the current call and connects you to the
  transferred call. The [DN] or Line LED flashes green (in-use).
.
You hear dial tone and the [DN] or Line LED flashes green
. (conference-rate).
All parties are conferenced. If the second call was placed on a
[DN] or CO line that appears on your telephone, the LED also
. flashes green at the in-use rate.
Conference Calls
37