Installing The Airflow Guide - HP Z400 Maintenance And Service Manual

Installing the airflow guide

1.
Power down the workstation (see
2. Disconnect power from the workstation (see
3. Remove the side access panel (see
4.
Press the power cables, including P1, down toward the system board between the DIMM slots and
the internal bay, as shown in the following figure.
Figure 5-38
ENWW
Predisassembly procedures on page
Removing the side access panel on page
Positioning the chassis cables
Predisassembly procedures on page
Removing and installing components
75).
75).
78).
111