Toshiba PERCEPTION 4000 User Manual page 44

PERCEPTION 4000
To Form a Three-way
Conference:
1. Establish a two-way
connection.
2. Press the hookswitch to place
the party on "soft hold."
3. Dial the station or directory
number of the other member
to be included in the
conference.
4. When connected to the party,
press the hookswitch to join
the held party and form a
three-way conference.
2-32
Listen for recall dial tone.
The call will proceed as a normal call. When the called party answers,
you will be connected to the party.
If the destination party is a busy/no-answer station, you can return to the
held party by pressing the hookswitch.
If the destination party is a busy/no-answer trunk, you can return to the
held party by pressing the hookswitch twice. The first press of the
hookswitch will disconnect the unanswered trunk, while the second press
will reconnect you to the held party.
If the called party is busy, you can automatically camp-on to the party by
remaining off-hook and waiting for success tone to sound. At this stage,
you can camp the held party onto the busy line by hanging up your
telephone (see Camp-on Transfer).
If there are no conference circuits currently available, you will hear
reorder tone. If this occurs, press the hookswitch to connect to the held
party.
The conference will be maintained until one or both of the parties hang(s)
up. When one party disconnects, you will be connected to the remaining
party.
At any point during the conference, you can drop the last-added party by
pressing the hookswitch.
NOTES:
1. A call to an attendant cannot be placed on hold.
2. If you hang up at any point before establishing a connection with a
third party, the held call will immediately recall your station.
FEATURE OPERATION