Dss® Box Without Digital Interface Hookup - Rf Hookup [E]; With This Hookup - Hitachi VT-DX815A Owner's Manual

DSS® BOX WITHOUT DIGITAL INTERFACE HOOKUP – RF
HOOKUP [E]
DSS® BOX WITHOUT DIGITAL INTERFACE HOOKUP –

WITH THIS HOOKUP

YOU CAN......
• WATCH AVAILABLE TV OR DSS® CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
YOU CAN'T......
• RECORD A CHANNEL OTHER THAN DSS® AND WATCH A DSS®
CHANNEL
Hookup E Illustration pic
Note: Your VCR cannot receive RF signals from the antenna or cable through
the DSS® box. Connect the antenna or cable cord to the IN FROM ANT jack of
the VCR, not to the RF IN/OUT jacks of the DSS® box.
FUNCTION
TV
Select and Watch
Channels using TV
Select and Watch
Channels using VCR
Record and Watch the
Same Channel
Record One Channel
Watch Another
Record and Watch the
Same DSS® Channel
Watch a Channel other
than DSS® and Record a
DSS® Channel
Watch Playback of a Tape 3 or 4
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either
channel 3 or channel 4. You need to select the appropriate channel.
• Turn on the power of both the TV and the VCR. Press the ANT. OUT
button on front of the VCR. Pressing the button alternates between RFCH
03 (channel 3) and RFCH 04 (channel 4) in the VCR's display.
Display the channel which is not used by a commercial channel in your
area.
CHANNEL SELECTION
VCR DSS® BOX
Select Channel to
Watch
3 or 4 Select Channel to
Watch
3 or 4 Select Channel to
Record
Select Channel to Select Channel to
Watch Record
3 or 4 Select L1
Select Channel to Select L1
Watch
RF HOOKUP
TABLE E
Select Channel to
Watch/Record
Select Channel to
Record
[E]
VCR indicator
(Press the VCR/TV
mode select button to
turn the VCR indicator
on or off)
OFF
(TV mode)
ON
(VCR mode)
ON
(VCR mode)
OFF
(TV mode)
ON
(VCR mode)
OFF
(TV mode)
ON
(VCR mode)
22