Playback; To Playback A Recorded Tape - Hitachi VT-DX815A Owner's Manual

Hitachi owner's manual vcr vt-dx815a

Table of Contents

PLAYBACK

Notes:

• The VCR and DSS® box must be connected via a digital interface A/V cable for

D-VHS playback.

• Playback may not be possible immediately after the digital A/V cable has been

unplugged or plugged in. Wait for at least 15 seconds and then start playback.

1 Turn on the TV and select the video channel (3 or 4).

Or, if you are hooked up with an audio/video cable, set the TV to AUX or

VIDEO.

2 Insert a recorded tape.

The power comes on automatically and the tape indicator lights on the

display.

• When a cassette without its safety tab is inserted, playback starts

automatically.

pic

3 Press the PLAY button to start playing the tape.

• When you connect the VCR and DSS® box via a digital A/V cable and

play back a D-VHS tape, the D-VHS indicator will light and the VCR will

automatically enter the D-VHS playback mode.

pic

Note: It takes several seconds until a picture appears.

• If the digital A/V cable comes unplugged during D-VHS playback,

playback will stop. Re-connect the digital A/V cable and start playback

again.

Table of Contents