Table of Contents
Advertisement
4.3.2 REASSIGN BLOCKS (07)
Bit
7
Byte
0
1
0
2
0
3
0
4
0
5
0
This command allocates alternate data blocks for defective data blocks specified
in the "Defect Data" list transferred form the INIT.
The INIT specifies the logical block address of one or more defective data blocks
in the "Defect Data" list which it transfers to the IDD. The IDD searches for
unused spare sectors for use as alternate blocks and allocates these alternate blocks
for the specified logical data blocks. Also, in the case of data blocks for which
alternate data blocks have already been specified, the IDD allocates other usable
spare sectors as alternate blocks for those data blocks.
Using this command, copying of the contents of the data in the logical data blocks
specified in the "Defect data" list to the allocated alternate data blocks is
attempted. If the data in logical data blocks which are specified in the "Defect
data" list are correctable by ECC correction, the corrected data are copied and
those data which are not correctable by ECC are copied as is in the uncorrected
state (including the errors) and in the case of other media errors, X '00' is copied
in all bytes. Furthermore, the contents of data in data blocks other than the logical
data blocks specified in the "Defect Data" list are not influenced by the alternate
allocation processing through this command.
Copying of the contents of data in the logical data blocks specified
in the "Defect data" list to alternate blocks allocated by this
command is attempted, but in some cases, copying cannot be done.
Confirmation of the contents of the data in allocated alternate
blocks, saving of data before issuing this command and restoring of
data after this command is executed are the responsibility of the
INIT.
C141-C009
6
5
4
X'07'
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4.3 Format Commands
3
2
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4-157
Advertisement
Table of Contents
