D-Link AirPlus G+ DI-824VUP+ Manual page 18

Using the Configuration Menu
Home > WAN > PPPoE
Most DSL users will
select this option to
obtain an IP address
automatically from
their ISP through the
use of PPPoE.
User Name
Password
Service Name
IP Address
Primary DNS
Secondary DNS
Maximum
Idle Time
MTU
Auto-reconnect
Auto-backup
Your PPPoE username provided by your ISP.
Your PPPoE password provided by your ISP.
(Optional) Check with your ISP for more information if they
require the use of service name.
(Optional) Enter in the IP Address if you are assigned a static
PPPoE address.
You will get the DNS IP automatically from your ISP but you
may enter a specific DNS address that you want to use instead.
(Optional) Input the secondary DNS address.
Enter a maximum idle time during which Internet connection is
maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Maximum Transmission Unit; default is 1492; you may need to
change the MTU to conform to your ISP.
If enabled, the Broadband Router will automatically connect to
your ISP after your system is restarted or if the connection is
dropped.
Enabling this feature will connect your router to the Internet us-
ing a dial-up service if your broadband connection becomes un-
available. A subscription to a dial-up service is required for the
auto-backup to work.
18