D-Link AirPlus G+ DI-824VUP+ Manual page 33

Using the Configuration Menu
Home > VPN Settings > Dynamic VPN Tunnel
VPN Settings - IKE
Tunnel Name
Dynamic VPN
Aggressive Mode
Local Subnet
Local Netmask
There are three parts that are necessary to setup the
configuration of IKE for the dedicated tunnel: basic setup, IKE
proposal setup, and IPSec proposal setup. Basic setup
includes the setting of following items: local subnet, local
netmask, remote subnet, remote netmask, remote gateway,
and pre-shared key. The tunnel name is derived from the previous
page of VPN setting. IKE proposal setup includes the setting
of a set of frequent-used IKE proposals and selecting from the
set of IKE proposals.
Current tunnel name.
This feature works with a VPN software client so the DI-
824VUP+ does not need to know the IP address of the re-
mote clients.
Enabling this mode will accelerate establishing the tunnel,
but the device will have less security.
The subnet of the VPN gateway's local network. It can be a
host, a partial subnet, or a whole subnet.
The netmask of the VPN gateway's local network.
33