D-Link AirPlus G+ DI-824VUP+ Manual page 53

Using the Configuration Menu
Advanced > Performance
Beacon Interval
DTIM interval
TX Rates
Wireless Mode
Mixed Mode
G Mode
Beacons are packets sent by an Access Point to synchronize a
wireless network. Specify a value. 100 is the default setting and is
recommended.
(Delivery Traffic Indication Message) 3 is the default setting. A DTIM
is a countdown informing clients of the next window for listening to
broadcast and multicast messages.
Select the data rate. Default is 1-2-5.5-11-22-54Mbps.
Select either mix mode or G mode.
The DI-824VUP+ will use either B or G mode depending on which
mode has a stronger frequency.
The DI-824VUP+ will only use G mode.
53