D-Link AirPlus G+ DI-824VUP+ Manual page 55

Using the Configuration Menu
Tools > Admin
You can change the administrator and user passwords here. It is recommended that you
change the administrator password from the default setting.The default password is blank
(nothing).
Password
Remote
Management
IP Address
Port
To change the administrator or user password, enter in the old pass-
word and enter the new password twice to confirm.
Remote Management allows the device to be configured through
the WAN (Wide Area Network) port from the Internet using a web
browser. A username and password is still required to access the
browser-based management interface.
Internet IP Address of the computer that has access to the DI-
824VUP+. If the IP Address is set to 0.0.0.0, this allows all Internet
IP addresses to access the DI-824VUP+.
The port number used to access the DI-824VUP+.
Example:http://x.x.x.x:8080, where x.x.x.x. is the WAN IP address
of the DI-824VUP++ and 8080 is the port used for the Web Manage-
ment interface.
55