Second Dial Tone [6-4]; Absent Message [6-5] - Panasonic KX-TAW848 Features Manual

4.12.5 Second Dial Tone [6-4]

A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and
the following digits. When a programmed Second Dial Tone Waiting code is dialed after seizing a CO line,
a preprogrammed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.5.4.5 Pause Insertion
Pause Repeating Counter
Specifies the number of pauses to be inserted when waiting for the second dial tone.
Default
1
Value Range
0–20
Programming References
None
Feature Guide References
1.5.4.5 Pause Insertion

4.12.6 Absent Message [6-5]

When a display PT user calls an extension, a message is shown on the caller's telephone display describing
the reason for absence. A maximum of 8 Absent Messages can be programmed, and any extension user
can select one of them.
4.12 Feature [6]
Feature Guide 529