Figure 7.24 Display Location Of The Serial Number (Gui Screen) - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
> 7.3 Advanced Copy Setup
Obtain the license key according the following procedure.
Procedure
1
1-1
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
• When the Advanced Copy Feature is purchased at the same time as the
ETERNUS DX60/DX80 (base unit), this procedure is not necessary
because the license is registered as a factory setting.
Attach the license label plate provided with the Advanced Copy Feature
to the rack rail near the ETERNUS DX60/DX80 which holds its license,
for future reference.
License label plate
• Check whether the license has already been registered using the
provided license label plate or the GUI screen.
- The license key (bar code and 16-digit numeric number) is printed in
the "License Key" column in the provided license label plate.
- The "Advanced Copy License" field in the Advanced Copy Status
screen of GUI is set to "Registered".
Obtain the Advanced Copy license key.
Prepare and check the following in advance.
- "ETERNUS DX60/DX80/DX90 Disk storage system Feature activation licenses"
This is provided with the Advanced Copy Feature.
- License label plate
This is provided with the Advanced Copy Feature. The license label is attached to
the license label plate, and TAN etc. are indicated.
- Serial Number of the ETERNUS DX60/DX80
The serial number can be checked via the GUI screen.

Figure 7.24 Display location of the serial number (GUI screen)

Release tie
164
Copyright 2010 FUJITSU LIMITED