Basic Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Motorola DCT2000 Installation Manual

BASIC OPERATION

Turning Power On and Off

Press POWER on the front panel to turn the DCT2000 on or off. If
using the remote control, be sure it is in cable mode by pressing
CABLE and then press POWER.

Changing Channels

You can change channels in two ways:
•
Press CHANNEL ▲ or ▼ on the front panel of the DCT2000, or
press CHANNEL + or - on the remote control to step through
the channel selection.
•
Enter the number of the channel you want to tune using the
numeric keys on the remote control.

Adjusting the Volume

Press VOLUME + or – on the remote control to adjust the volume.
When you adjust the volume, the volume scale is displayed on the
screen. Press MUTE on the remote control to turn the sound off and
on again.
For best audio quality, use the remote control to set the DCT2000 to
approximately ¾ of the maximum volume level and then adjust the
audio levels on the external devices.

Electronic Program Guide

The electronic program guide displays information about TV programs
and enables you to access features such as Parental Control or
Pay-Per-View. Electronic program guides can vary in look and feel with
each service provider. Reference the electronic program guide
instruction manual for detailed instructions.
8