Powering The Headphones On/Off; Choosing The Operating Mode; Powering The Transmitter Cradle On/Off - Silvercrest RFH 1863 User Manual And Service Information

SilverCrest Wireless Headphones RFH 1863

Powering the Headphones On/Off

If the battery level of the headphones is high enough (the power and charge
indicator (15) on the transmitter must light green), you may remove the
headphones from the transmitter cradle.
You may optionally power the headphones by using
conventional batteries. For more information, read the
information on page 15 – Battery Operation.
Press the On/Off button (13) of the headphones once to switch them on.
The power indicator (11) will light orange.
Press the On/Off button of the headphones again to switch them off.

Choosing the Operating Mode

Slide the mode selection switch (7) to the "WL" position to use the
wireless headphones to listen to an external audio source.
Slide the mode selection switch (7) to the "FM" position to receive your
favourite FM radio programmes.

Powering the Transmitter Cradle On/Off

You may power the transmitter cradle off whenever it is not needed. When
powered off, it will not transmit any RF signals and the headphones battery
cannot be charged.
Slide the On/Off and selection switch (1) on the transmitter cradle to the
"Power off" position. All indicators of the transmitter cradle will stop
lightning.
To power the transmitter cradle back on, slide the selection switch onto
the position of the previously selected tuning frequency.
You may optionally power the transmitter cradle by using
conventional batteries. For more information, see page
17 – Powering the Transmitter Cradle by Using Batteries.
10 - English