Appendix; Troubleshooting - Silvercrest RFH 1863 User Manual And Service Information

SilverCrest Wireless Headphones RFH 1863

Appendix

Troubleshooting

The headphones do not power on, there are no indicator lights.
Recharge the built-in battery or insert conventional batteries.
Verify the position of the function switch located in the left earpiece. For
conventional battery operation it must be placed on the "DC2" position: for
operation from the internal rechargeable battery it must be placed on
"DC1".
The headphones power on but there is no sound output.
Check that the transmitter cradle has been powered on and connected
properly to your audio source.
Check if the transmitter is sending an audio signal. The send indicator
should light blue.
Check if the transmission frequency has been synchronized properly. Try
all three channel settings on the transmitter cradle.
Check if the audio source is playing an audio signal. You can use a
connection cable to connect the headphones directly to the audio source.
Unable to power the transmitter cradle on.
Did you connect the power adapter or are the inserted batteries well
charged?
Sound is interrupted or noisy.
The rechargeable battery or the inserted batteries of the headphones are
exhausted. Recharge the internal battery or replace the batteries with new
batteries of the same type.
You are beyond the maximum range of the transmitter. Move closer to the
transmitter cradle.
18 - English