Battery Operation; Powering The Headphones By Using Batteries - Silvercrest RFH 1863 User Manual And Service Information

Battery Operation

You may power both the transmitter cradle and the headphones by using
conventional batteries. Batteries are not included in the package.
Remove batteries when the device is not to be used for a
long time.
Respect the environment. Old batteries do not belong in
with domestic waste. They must be handed in to a
collection point for old batteries.
Rechargeable AAA-sized batteries cannot be recharged
when inserted into the device.

Powering the Headphones by Using Batteries

The headphones battery compartment is located in the left earpiece.
Hold the left earpiece with your hand and use the other hand to rotate
the ear cushion counter-clockwise several degrees.
The ear cushion is fixed on a plastic frame. You need to
remove this frame from the locking mechanism together
with the ear cushion. Do not pull on the ear cushion itself.
Carefully remove the ear cushion from the earpiece.
Insert two AAA-sized batteries into the earpiece battery compartment.
Make sure you match the correct polarity. Note the + and – icons on the
batteries and inside the battery compartments.
Slide the function switch to the "DC2" position to switch to battery mode.
Place the ear cushion onto the earpiece so that the locking noses of the
plastic frame are inserted into the corresponding notches on the
earpiece. Next rotate the ear cushion clockwise a few degrees until it is
properly aligned on the earpiece.
SilverCrest Wireless Headphones RFH 1863
English - 15