Using The Headphones With A Wired Connection - Silvercrest RFH 1863 User Manual And Service Information

SilverCrest Wireless Headphones RFH 1863

Using the Headphones with a Wired Connection

If your location is close to the audio source and you don't wish to make
portable use of your headphones, you may use them with a normal cable
connection. In this case you don't need the wireless capabilities of the
transmitter cradle.
For wired operation, use one of the supplied connection cables (see page 7,
item 19 or item 20).
To save battery power, press the On/Off button (13) to power the
headphones off.
Connect one end of the connection cable to the audio input jack (9) of
your headphones. Connect the other end of the cable to the
headphones output jack of your Hifi equipment.
If your Hifi equipment features a 6.3mm jack connector,
connect the adapter plug (see page 7, item 22) to the
cable.
You may also connect the adapter cable (see page 7,
item 21) to the cable to use the Cinch audio outputs of
your Hifi equipment.
With this connection type, the headphones work as a
passive device. Therefore the volume can only be
adjusted on the audio source.
Switching to radio reception is not possible during wired
operation. If you want to listen to radio stations, you must
first disconnect the connection cable from the audio input
jack (9) of your headphones.
14 - English