Selecting The Language For The System Menu; Switching From The System Menu To Idle State - Siemens HiPath 4000 Operating Manual

Step by Step
q
Language
r
German?
Service

Selecting the Language for the System Menu

Your HiPath 4000 system can be configured for up to
five languages. The first language set is the default lan-
guage. If "Language" is configured as an FCN entry on
your handset, you can set another language.
The length of time the other language remains active
depends on how language selection is configured. Two
different variants exist:
• Static language selection
The language remains set until you select another
language.
Temporary language selection
•
The language is set until you end the next call and
then reverts to the default language.
Selecting the language:
FCN
Press the display key.
OK
Select and confirm.
OK
Select and confirm.
The selected language appears on your screen for five
seconds and is then set.
This operating manual is also available in other
languages
Switching from the System Menu to
Idle State
You are in a HiPath 4000 menu and would like to quickly
revert to idle state.
FCN
Press the display key.
OK
Confirm.
Making Calls – Basic Functions
Page 124.
47