Programming Speed Dialing - Siemens HiPath 4000 Operating Manual

Step by Step
v
Program/Service?
Destinations?
v
Speed dialing?
New entry?
Save?
Saving Functions, Wake-Up Calls, and Reminders
speed-dial number that is then programmed with an
LCR access code and the destination station number,
for example.
Program the following sequence on speed-dial
number 1:
*3 (PIN access code) + 12345678901 (PIN) + *55
(speed-dial code) + 5 (number of the next speed-dial
number you want to use).
Then program the entry for speed-dial number 5.
9 (LCR access code) + 156192317 (destination station
number).
If you now select speed-dial number 1, this entry is first
processed and followed automatically by the entry for
speed-dial number 5.

Programming Speed Dialing

OK
Select and confirm.
OK
Confirm.
OK
Select and confirm.
~
Enter the speed-dial number you wish to use (0 to 9).
If the relevant digit is already programmed, the associ-
ated station number is displayed.
OK
Confirm.
~
Enter the station number.
In the case of external station numbers, enter the exter-
nal code followed by the station number.
OK
Confirm.
93