History Log; Set Date & Time - Bosch Solution 16i User Manual

Solution16 User Guide
i
System > Commands >

History Log

This menu allows you to review up to the last 256 history
events which have been recorded by the system. Events
are shown from the newest event to the oldest.
Each history event is displayed on up to 7 different screens.
Each screen displays a different piece the event description.
By combining the information from all screens, you will
be able to determine the exact particulars of each history
event.
At any time you can move to the next history event by
pressing the [↑] and [↓] keys. See the examples below for
more details.
1. Enter [Master PIN] + [MENU]
2. Enter [7] + [0] + [2] +[OK]. The keypad will begin
displaying the most recent event stored in the
history log.
3. Use the [↑] and [↓] keys scroll between history
events.
4. Press [OK] or [MENU] to exit.
Display shows the
history event number.
Event 123
Display shows the
Event Descrption1.
Battery
Display shows the
Event Descrption 2.
Trouble
Display shows the
Device number.
P001 = Panel 1
Display shows the
Date of the event.
03-January
Display shows the
Time of the event.
21:15 or 9:15pm
Display shows the
Event Result.
S1 = Reported event
to route 1
L2 = Logged the event
26
HiSLoG
MENU 7-0-2
E123
BAttry
trbl
P001
03-JAn
21-15
S1-L2
System > Clock >
Set Date & Time
This menu allows you to program or adjust the system
clock. Clock programming is performed over 5 different
screens with each screen displaying a different property.
At any time you can move to the next screen by pressing the
[←] and [→] keys. You should step through all 5 screens to
confirm the time and date are correct before pressing the
[OK] key to exit.
See the example below. 01/01/2008 21:53
1. Enter [Master PIN] + [MENU]
2. Enter [7] + [1] + [0] + [OK]. The keypad will display
the currently programmed day of the month. Use
the numeric keys to enter the correct day (1 - 31)
and then press the [→] key.
3. The keypad will display the currently programmed
month. Use the numeric keys to enter the correct
month (1 -12).
4. The keypad will display the currently programmed
year. Use the numeric keys to enter the last 2 digits
of the current year (01 -99).
5. The keypad will display the currently programmed
hour of the day in 24hr time. Use the numeric keys
to enter the correct hour (00 -23).
6. The keypad will display the currently programmed
minute of the day. Use the numeric keys to enter
the correct minute (01 -59).
7. Use the [←] and [→] keys at any time to confirm
programming and then press [OK] or [MENU] to exit.
CLoC
MENU 7-1-0
dd =01
mm =01
yy =08
hh =21
mm =35
Bosch Security Systems 10/07 BLCC500U FTR1.01